Safety Canopy® Module
WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Anytime the Safety Canopy® or side air curtain module has deployed, a new headliner and new A-, B- and C-pillar upper trim panels and attaching hardware must be installed. Remove any other damaged components and hardware and install new components and hardware as needed. Failure to follow these instructions may result in the Safety Canopy® or side air curtain module deploying incorrectly and increases the risk of serious personal injury or death in a crash.
NOTE:
The Safety Canopy® modules are NOT interchangeable. If installing a new Safety Canopy® module, the correct Safety Canopy® module MUST be installed for the vehicle application.
The Safety Canopy® module:
- is mounted above the headliner.
- attaches from the A-pillar frame to the B-pillar or C-pillar frame.