Normal Operation
WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
The Restraints Control Module (RCM) monitors the RH front impact severity sensor circuits for the following faults:
- Open circuit
- Short to voltage
- Short to ground
- Faulted RH front impact severity sensor
If a fault is detected, the RCM stores DTC B0095:11 or B0095:93 in memory and sends a message to the Instrument Panel Cluster (IPC) to illuminate the air bag warning indicator.
- B0095:11 (Right Frontal Restraints Sensor: Circuit Short to Ground) - A fault is indicated when the RCM senses a short to ground on the RH front impact severity sensor feed circuit.
- B0095:93 (Right Frontal Restraints Sensor: No Operation) - A fault is indicated when the RCM senses a faulted sensor, a short to voltage on the feed circuit or an open feed or return circuit.
This pinpoint test is intended to diagnose the following:
- Wiring, terminals or connectors
- RH front impact severity sensor
- RCM