LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 148 (Parking Brake System - Parking Brake & Actuation - F150) >> Removal And Installation >> Parking Brake Shoes >> Removal

Parking Brake Shoes: Removal

WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Removal steps in this procedure may contain installation details.
NOTE: One parking brake shoe kit contains the linings required for both the LH and RH side.
  1. Release the parking brake cable tension. For additional information, refer to PARKING BRAKE CABLE TENSION RELEASE  .
  2. Remove the rear brake disc. For additional information, REFER to REAR DISC BRAKE .
  3. Fig 1: Locating Parking Brake Shoes, Springs And Wheel Cylinder
    G07958150Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals