Parking Brake Cable - Rear, RH: Removal

WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Removal steps in this procedure may contain installation details.

Release the parking brake cable tension. For additional information, refer to PARKING BRAKE CABLE TENSION RELEASE .
Fig 1: Releasing Parking Brake Cable Tension (1 Of 7)
Courtesy of FORD MOTOR CO.
Fig 2: Releasing Parking Brake Cable Tension (2 Of 7)
Courtesy of FORD MOTOR CO.
To install, tighten to 15 Nm (133 lb-in).

Fig 3: Releasing Parking Brake Cable Tension (3 Of 7)
Courtesy of FORD MOTOR CO.
Fig 4: Releasing Parking Brake Cable Tension (4 Of 7)
Courtesy of FORD MOTOR CO.
Fig 5: Releasing Parking Brake Cable Tension (5 Of 7)
Courtesy of FORD MOTOR CO.
To install, tighten to 30 Nm (22 lb-ft).

Fig 6: Releasing Parking Brake Cable Tension (6 Of 7)
Courtesy of FORD MOTOR CO.
Fig 7: Releasing Parking Brake Cable Tension (7 Of 7)
Courtesy of FORD MOTOR CO.