Section 147 (Rear Disc Brake System - F150): Specifications
WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
MATERIAL SPECIFICATIONS
| Item | Specification | Fill Capacity |
|---|---|---|
| High Performance DOT 3 Motor Vehicle Brake Fluid PM-1-C (US); CPM-1-C (Canada) |
WSS-M6C62-A or WSS-M6C65-A1 | 1, 420 ml (3.0 pt) |
| Metal Brake Parts Cleaner PM-4-A or PM-4-B (US); CPM-4 (Canada) |
- | - |
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Brake Disc | |
| Brake disc minimum thickness | 23.0 mm (0.906 in) |
| Brake Pads | |
| Brake pad maximum taper wear (in any direction) | 3.0 mm (0.118 in) |
| Brake pad minimum thickness | 3.0 mm (0.118 in) |
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| Axle vent valve | 18 | - | 159 |
| Brake caliper bleeder screw | 10 | - | 89 |
| Brake caliper flow bolt | 35 | 26 | - |
| Brake caliper guide pin bolts | 33 | 24 | - |
| Brake caliper support bracket bolts | 150 | 111 | - |
| Brake flexible hose bracket-to-axle bolt | 30 | 22 | - |
| Brake flexible hose bracket-to-frame bolt | 17 | - | 150 |
| Brake tube fitting | 17 | - | 150 |