Section 145 (Front Drive HALFSHAFTS -- F150): Specifications
WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
MATERIAL SPECIFICATIONS
| Item | Specification | Fill Capacity |
|---|---|---|
| Constant Velocity Joint Grease (High Temperature) XG-5 |
WSS-M1C258-A1 | - |
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Left halfshaft assembled length | 406.45 mm (16.00 in) |
| Right halfshaft assembled length | 411.85 mm (16.21 in) |
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| Brake flexible hose bracket bolt | 30 | 22 | - |
| Integrated Wheel End (IWE) bolts | 12 | - | 106 |
| Tie-rod end nut | 115 | 85 | - |
| Upper ball joint nut | 150 | 111 | - |
| Wheel hub nut | 40 | 30 | - |
| Wheel speed sensor harness bracket bolt | 12 | - | 106 |