Section 144 (Four Wheel Drive (4WD) Systems -- F150): Specifications
WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
MATERIAL SPECIFICATIONS
| Item | Specification | Fill Capacity |
|---|---|---|
| Ultra Silicone Sealant TA-29 |
- | - |
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| Axle nut | 40 | 30 | - |
| Front brake flexible hose bracket bolt | 12 | - | 106 |
| Integrated Wheel End (IWE) bolts | 12 | - | 106 |
| Shift lever assembly-to-floorpan bolt | 24 | 18 | - |
| Tie-rod nut | 115 | 85 | - |
| Transfer Case Control Module (TCCM) screws | 7 | - | 62 |
| Transfer case shift motor bolts | 10 | - | 89 |
| Transfer case shift motor bracket bolt | 10 | - | 89 |
| Transfer case shift motor bracket nut | 3 | - | 27 |
| Upper ball joint nut | 115 | 85 | - |
| Wheel speed sensor harness bracket bolt | 12 | - | 106 |