LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 140 (Steering Column Switches - F150) >> Removal And Installation >> Steering Column Control Module (SCCM) >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the steering wheel rotation sensor. For additional information, REFER to ANTI-LOCK BRAKE SYSTEM (ABS) AND STABILITY CONTROL .
  2. Disconnect the 3 Steering Column Control Module (SCCM) electrical connectors.
  3. Remove the 3 screws and the SCCM.
    • To install, tighten to 2 Nm (18 lb-in).
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals