Steering Column Control Module (SCCM)
WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
The Steering Column Control Module (SCCM) controls various systems and/or features:
- Wiper and washer system, REFER to WIPERS AND WASHERS .
- Exterior lighting, REFER to EXTERIOR LIGHTING .
- Interior lighting, REFER to INTERIOR LIGHTING .
- Steering wheel audio controls (if equipped), REFER to INFORMATION AND ENTERTAINMENT SYSTEMS .
- Steering wheel message center controls (if equipped), REFER to INSTRUMENTATION, MESSAGE CENTER, AND WARNING CHIMES .
- Cruise control, REFER to CRUISE CONTROL .
- Adjustable pedals, REFER to HYDRAULIC BRAKE ACTUATION .
- Steering column control, REFER to STEERING COLUMN .
The SCCM also provides a pass-through circuit path for various components and/or features:
- Steering wheel switch illumination
- Driver air bag module
- Horn
The multifunction switch, brake pedal control switch (if equipped), hazard flasher switch, steering column control switch (if equipped), and LH/RH steering wheel switches (if equipped) provide inputs to the SCCM. Based on inputs from the various switches, the SCCM communicates over the High Speed Controller Area Network (HS-CAN) or the Local Interconnect Network (LIN) to control the supporting features.