Normal Operation
WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
The Steering Column Control Module (SCCM) continuously monitors input voltage for correct operation. If voltage outside of defined limits is detected by the SCCM, the applicable DTC sets.
- DTC B119D:17 (Vehicle Battery: Circuit Above Threshold) - This DTC sets in continuous memory if the SCCM detects battery voltage above 19 volts on the battery voltage supply circuit.
This pinpoint test is intended to diagnose the following:
- Charging system
- SCCM
NOTE:
Carry out a thorough INSPECTION AND VERIFICATION before proceeding with the pinpoint test. Refer to INSPECTION AND VERIFICATION
.
NOTE:
DTC B119D:17 can set if the vehicle has been recently jump started or the vehicle battery has been recently charged.