LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 139 (Exterior Lighting System - F150) >> Removal And Installation >> High Mounted Stoplamp >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the 2 screws and the high mounted stoplamp.
    • Disconnect the electrical connector.
  2. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals