LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 136 (Information Center - Instrumentation, Message Center, And Warning Chimes - F150) >> General Procedures >> Instrument Panel Cluster (IPC) Lens >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the Instrument Cluster (IC). For additional information, REFER to Instrument Panel Cluster (IPC)  .
  2. Remove the 2 screws.
  3. Release the 7 tabs and remove the IC lens.
    Fig 1: Locating IC Lens Tabs
    G06172371Courtesy of FORD MOTOR CO.
  4. To install, reverse the removal procedure.