Measurement Symbols
WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
The measurement symbols are used to show where to measure which type of measurement to carry out a procedure step.
| Item | Description |
|---|---|
| 1 | Measure the current using a digital multimeter |
| 2 | Measure the voltage using a digital multimeter |
| 3 | Measure the resistance using a digital multimeter |
| 4 | Measure the length/distance |
| 5 | Check that the specified pressure is available using a suitable pressure gauge |
| 6 | Measure the pressure at the specified port using a suitable pressure gauge |
| 7 | Measure the time using a suitable stopwatch |
| 8 | Wait for the specified period of time |
| 9 | The specified task requires the specified minimum temperature |
| 10 | The specified task requires the specified maximum temperature not to be exceeded |
| 11 | The specified task requires the specified temperature range |
| 12 | The specified task requires the specified temperature |
| 13 | Measure and check for the specified value using a dial indicator gauge |
| 14 | Measure and check for the specified MAX value using a dial indicator gauge |
| 15 | Measure and check for the specified MIN value using a dial indicator gauge |