Drilling and grinding symbols
WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
These symbols indicate the type of drilling or grinding to be used.
| Item | Description |
|---|---|
| 1 | Drill through first body layer with a suitable diameter |
| 2 | Drill through first body layer with the specified diameter |
| 3 | Drill through the indicated number of body layers with a suitable diameter |
| 4 | Drill through the indicated number of body layers with the specified diameter |
| 5 | Drill through the indicated number of body layers with a suitable diameter |
| 6 | Drill through the indicated number of body layers with the specified diameter |
| 7 | Drill through all body layers with a suitable diameter |
| 8 | Drill through all body layers with the specified diameter |
| 9 | Grind one layer |
| 10 | Grind two layers |
| 11 | Grind to last layer |
| 12 | Grind all layers |
| 13 | Material thickness > Xmm |