Ford On-Demand DTCs

WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

Ford Motor Company modules have a unique feature that performs a special diagnostic program at the request of the technician (using a scan tool). This "On-demand" diagnostic program can exercise system outputs not normally running when the car is parked and record observed faults. These diagnostic codes are communicated to the scan tool; they are not recorded in module memory. An on-demand test is an effective tool for evaluating real input and output conditions during module activity - activity that might not normally be occurring during service bay conditions. For example, an air suspension module on-demand test can run the compressor, vent the system, and observe the report from the height sensor even when the car is already at correct trim height and not requiring height adjustment.