Section 128 (Steering System - Hydraulic Power Assist Steering - F150): Specifications
WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
MATERIAL SPECIFICATIONS
| Item | Specification | Fill Capacity | ||
|---|---|---|---|---|
| Dye-Lite® ATF/Power Steering Fluid Leak Detection Dye 164-R3701 (Rotunda) |
- | - | ||
| MERCON® V Automatic Transmission Fluid XT-5-QM (or XT-5-QMC) (US); CXT-5-LM12 (Canada) |
MERCON® V | 2.5 L (5.4 pt)(1) | ||
|
||||
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Steering Gear - SVT Raptor Crew Cab and Base F150 Without Max Trailer Tow | |
| Ratio | 17:1 |
| Turns of steering wheel lock to lock (linkage disconnected) | 3.26 |
| Steering Gear - SVT Raptor Super Cab and Base F150 With Max Trailer Tow | |
| Ratio | 20:1 |
| Turns of steering wheel lock to lock (linkage disconnected) | 3.74 |
| Power Steering Pump | |
| Flow | 3.0 gpm ± 0.2 @ 145 psi and 1, 500 RPM |
| Minimum capacity | 1.6 gpm @ 725 psi and 500 RPM |
| Relief pressure | 1, 400-1, 520 psi |
| Power Steering Purge Vacuum | |
| Minimum vacuum | 67-84 kPa (20-25 in-Hg) |