Section 127 (HVAC - Climate Control System - General Information And Diagnostics - F150): Specifications

WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.

MATERIAL SPECIFICATIONS

Item	Specification	Fill Capacity
Motorcraft® A/C Cooling Coil Coating YN-29	-	-
Motorcraft® A/C System Flushing Solvent YN-23	-	-
Motorcraft® PAG Refrigerant Compressor Oil YN-12-D	WSH-M1C231-B	100 ml (3.4 fl oz)
Motorcraft® R-134a Refrigerant YN-19 (US); CYN-16-R (Canada)	WSH-M17B19-A	0.68 kg (24 oz) (1.5 lb)
Stay-Brite® R-134a Leak Detection Dye 164-R6060 (Rotunda)	-	-

GENERAL SPECIFICATIONS

Item

Specification

A/C Compressor Magnetic Clutch

Air gap clearance

0.3 - 0.6 mm (0.011 - 0.023 in)

A/C Pressure Relief Valve ⁽¹⁾

Open pressures

3, 792-4, 137 kPa (550-600 psi)

Evaporator Temperature Sensor

On/off temperatures

2.2-3.3°C (36-38°F)

Refrigerant System Dye

R-134a Leak Detection Dye 164-R6060 or 164-R6081

⁽¹⁾	Manifold gauge set pressures may vary slightly depending on the distance between the service gauge port valve and the A/C pressure relief valve, low charge protection and pressure cutoff switch locations.