LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 124 (Engine System - General Information - F150) >> General Procedures >> Valve Stem Diameter

Valve Stem Diameter

WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Refer to the appropriate Engine information for the specification.
  1. Measure the diameter of each intake and exhaust valve stem at the points shown in illustration. Verify the diameter is within specification.
Fig 1: Measuring Valve Stem Diameter
G06064097Courtesy of FORD MOTOR CO.