Section 123 (Brake System - General Information - F150): Specifications
WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
MATERIAL SPECIFICATIONS
| Item | Specification | Fill Capacity |
|---|---|---|
| High Performance DOT 3 Motor Vehicle Brake Fluid PM-1-C (US); CPM-1-C (Canada) | WSS-M6C62-A or WSS-M6C65-A1 | 1, 420 ml (3.0 pt) |
| Metal Brake Parts Cleaner PM-4-A or PM-4-B (US); CPM-4 (Canada) | - | - |
| Silicone Brake Caliper Grease and Dielectric Compound XG-3-A | ESE-M1C171-A | - |
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Brake Disc | |
| Front brake disc minimum thickness | 32 mm (1.259 in) |
| Rear brake disc minimum thickness | 23.0 mm (0.906 in) |
| Brake Pads | |
| Maximum brake pad taper wear (in any direction) | 3.0 mm (0.118 in) |
| Minimum brake pad thickness | 3.0 mm (0.118 in) |
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| Brake caliper bleed screw | 10 | - | 89 |
| Master cylinder primary brake tube fittings | 28 | 21 | - |
| Master cylinder secondary brake tube fitting | 20 | - | 177 |