Tire Pressure Monitor (TPM) Module: Removal
WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Electronic modules are sensitive to static electrical charges. If exposed to these charges, damage may result.
- Remove the RH instrument panel side finish panel.
- Open the glove compartment door and while pushing in on the glove compartment tab, position the glove compartment downwards.
- Remove the screw from the TPMS module mounting bracket.
- Disconnect the TPMS module electrical connector and the external antenna connector.
- Separate the TPMS module from the TPMS module mounting bracket.