Section 116 (Driveline System - General Information -- F150): Specifications
WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
MATERIAL SPECIFICATIONS
| Item | Specification | Fill Capacity |
|---|---|---|
| Motorcraft® High Contrast Hypoid Gear Marking Compound XG-14 |
- | - |
| Threadlock and Sealer TA-25 |
WSK-M2G351-A5 | - |
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Drive pinion flange runout | 0.25 mm (0.010 in) |
| Maximum allowable driveshaft runout | 0.50 mm (0.020 in) |
| Minimum Traction-Lok breakaway torque | 27 Nm (20 lb-ft) |
| U-joint operating angle | 0.5°-3.0° |