LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 115 (Engine Mechanical - 6.2L (2V) - F150) >> In-Vehicle Repair >> Oil Pump Screen and Pickup Tube >> Removal

Oil Pump Screen and Pickup Tube: Removal

WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the oil pan. For additional information, refer to Oil Pan  .
  2. Remove the oil pump screen and pickup tube support bracket nut.
    Fig 1: Locating Oil Pump Screen And Pickup Tube Support Bracket Nut
    G06518262Courtesy of FORD MOTOR CO.
  3. Remove the 2 bolts and the oil pump screen and pickup tube.
Fig 2: Locating Oil Pump Screen And Pickup Tube Bolts
G06518263Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals