LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 115 (Engine Mechanical - 6.2L (2V) - F150) >> In-Vehicle Repair >> Flexplate >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the transmission. For additional information, REFER to AUTOMATIC TRANSAXLE/TRANSMISSION - 6R80 .
  2. Rotate the engine clockwise until the 2 slotted holes on the flexplate are at the 6 o'clock position as shown in illustration.
    Fig 1: Locating Flexplate Slotted Holes
    G06518277Courtesy of FORD MOTOR CO.
  3. Remove the 8 bolts and the flexplate.
    • Discard the 8 flexplate bolts.
scientia non olet · About LEMON Manuals