LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 115 (Engine Mechanical - 6.2L (2V) - F150) >> In-Vehicle Repair >> Engine Oil Pressure (EOP) Switch >> Removal

Engine Oil Pressure (EOP) Switch: Removal

WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, REFER to JACKING & LIFTING .
  2. Disconnect the Engine Oil Pressure (EOP) switch wiring harness retainer and the electrical connector.
  3. Remove the EOP switch.
scientia non olet · About LEMON Manuals