Crankshaft Rear Seal with Retainer Plate: Notes
WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOLS
| Handle 205-153 (T80T-4000-W) |
|
| Installer, Rear Main Seal 303-1250 |
|
| Remover, Crankshaft Rear Oil Seal 303-519 (T95P-6701-EH) |
|
| Slide Hammer 100-001 (T50T-100-A) |
|
| Vehicle Communication Module (VCM) and Integrated Diagnostic System (IDS) software with appropriate hardware, or equivalent scan tool |
MATERIAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Motorcraft® Metal Surface Prep ZC-31-A |
- |
| Motorcraft® SAE 5W-20 Premium Synthetic Blend Motor Oil (US); Motorcraft® SAE 5W-20 Super Premium Motor Oil (Canada) XO-5W20-QSP (US); CXO-5W20-LSP12 (Canada) |
WSS-M2C945-A |
| Silicone Gasket and Sealant TA-30 |
WSE-M4G323-A4 |
| Motorcraft® Silicone Gasket Remover ZC-30 |
- |