LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 114 (Engine Mechanical - 5.0L (4V) - F150) >> In-Vehicle Repair >> Oil Level Indicator and Tube >> Removal

Oil Level Indicator and Tube: Removal

WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: During engine repair procedures, cleanliness is extremely important. Any foreign material, including any material created while cleaning gasket surfaces, that enters the oil passages, coolant passages or the oil pan, can cause engine failure.
  1. Remove the LH valve cover. For additional information, refer to VALVE COVER - LH  .
  2. Depress the 4 tabs and remove the oil level indicator tube.
    Fig 1: Removing Oil Level Indicator Tube By Pressing Tabs
    G07408851Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals