LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 114 (Engine Mechanical - 5.0L (4V) - F150) >> In-Vehicle Repair >> Oil Level Indicator and Tube >> Installation

Oil Level Indicator and Tube: Installation

WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the oil level indicator tube.
    • Push the oil level indicator tube into the valve cover until it clicks into place.
  2. Install the LH valve cover. For additional information, refer to VALVE COVER - LH  .
scientia non olet · About LEMON Manuals