LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 114 (Engine Mechanical - 5.0L (4V) - F150) >> In-Vehicle Repair >> Engine Oil Pressure (EOP) Switch >> Removal

Engine Oil Pressure (EOP) Switch: Removal

WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.

    4x2 vehicles 

  1. With the vehicle in NEUTRAL, position it on a hoist. Refer to JACKING & LIFTING .
  2. 4x4 vehicles 

  3. Remove the generator. Refer to GENERATOR -- 5.0L .
  4. All vehicles 

  5. Disconnect the EOP switch electrical connector.
    • Remove the EOP switch.
    Fig 1: EOP Switch
    G00590216Courtesy of FORD MOTOR CO.