LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (OEM Connector Repair Procedures - F150) >> Connector Repair Procedures >> Restraint system terminals must not be removed or repaired >> Terminal not properly seated

Terminal not properly seated

WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.

1 = Locked terminal

2 = Male half

3 = Female half

4 = Seal

5 = Intermittent contact

6 = Unlocked terminal (Hidden by wire seal)

7 = Seal

Check for unlocked terminals by pulling each wire at the end of the connector.

Fig 1: Identifying Connector Components (Terminal Not Properly Seated)
G07906987Courtesy of FORD MOTOR CO.