LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 104 (Parking Aid System -- F250-F550 Super Duty) >> Removal And Installation >> Video Camera >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the tailgate release handle. For additional information, refer to HANDLES, LOCKS, LATCHES AND ENTRY SYSTEMS .
  2. Remove the 2 push nuts.
  3. Disconnect the electrical connector.
  4. Remove the video camera from the tailgate release handle.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals