Principles of Operation
The rear video camera system assists the driver while reversing or parking the vehicle. The video camera is located in the tailgate release handle.
For vehicles without navigation, the image of the area behind the vehicle is displayed in the left portion of the auto-dimming interior mirror assembly.
For vehicles with navigation, the image of the area behind the vehicle is displayed in the screen of the Audio Control Module (ACM). A dashed line on the displayed image represents the center of the vehicle and 3 color-coded lines (red, yellow, green) identify different zones between the rear of the vehicle and objects.
For vehicles without navigation, the signal from the rear video camera is sent to the auto-dimming interior mirror display on a pair of shielded video circuits.
For vehicles with navigation, the signal from the rear video camera is sent to the ACM on a pair of shielded video circuits. The rear video camera system is active with the ignition in RUN and the transmission selector in the REVERSE (R) position. For vehicles without navigation, the system remains active for approximately 3 seconds after the transmission selector is moved from the REVERSE (R) position. The rear video camera system cannot be disabled during these conditions.
For vehicles with navigation, the video system has a delay feature that keeps the image displayed on the ACM until the vehicle reaches 8 km/h (5 mph) when the vehicle is shifted out of REVERSE (R) or if any button on the ACM is pressed. The image will not be displayed if the vehicle is shifted into PARK (P).