Component testing procedure - Roof opening panel control switch
WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
COMPONENT TESTING PROCEDURE CHART - ROOF OPENING PANEL CONTROL SWITCH
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Tilt Switch | 12 and 3, 12 and 8 | Push Tilt (UP) | Closed circuit |
| 12 and 3, 12 and 6 | Pull Tilt (DOWN) | Closed circuit | |
| Slide Switch | 12 and 6 | Push Slide (OPEN) | Closed circuit |
| 12 and 8 | Pull Slide (CLOSE) | Closed circuit | |
| Tilt / Slide Switch | 12 and 7, 8, 6, 3 | At rest | Open circuit |