LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (OEM Component Testing -- F250-F550 Super Duty) >> Component Testing >> Master window control switch - Crew Cab WITHOUT WINDOW ONE-TOUCH UP >> Component testing procedure

Component testing procedure

WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
COMPONENT TESTING PROCEDURE CHART

Circuit to test Connect self-powered test light or ohmmeter to terminals Move switch to these positions A good switch will indicate
Switch lock 2, C504A and 2, C504B Lock On Closed circuit
Lock Off Open circuit
Left front window circuit 2, C504A and 5, C504A Up Closed circuit
1, C504A and 7, C504B
2, C504A and 1, C504A Down Closed circuit
5, C504A and 7, C504B
Right front window circuit 2, C504A and 8, C504A Up Closed circuit
3, C504A and 7, C504B
2, C504A and 3, C504A Down Closed circuit
8, C504A and 7, C504B
Left rear window circuit 2, C504A and 6, C504B Up Closed circuit
1, C504B and 7, C504B
2, C504A and 1, C504B Down Closed circuit
6, C504B and 7, C504B
Right rear window circuit 2, C504A and 8, C504B Up Closed circuit
4, C504B and 7, C504B
2, C504A and 4, C504B Down Closed circuit
8, C504B and 7, C504B