Pinpoint Test M : U3000:54: Notes
WARNING: This page is about a different car, the 2015 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
Refer to Vehicle Dynamic Systems for schematic and connector information.
Normal Operation and Fault Conditions
When a new EPB module is installed on the vehicle, the module must then be configured to operate correctly. If the configuration is not carried out, the EPB system fails to function, the yellow parking brake indicator illuminates and a message appears in the message center.
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| U3000:54 | Control Module: Missing Calibration | This DTC is pre-set in a new EPB module and clears automatically when the EPB module is configured correctly. |
Possible Sources
- EPB module