Material Specifications

WARNING: This page is about a different car, the 2012 Ford F550 Super Duty and 2012 Ford F450 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.

MATERIAL SPECIFICATIONS

Item

Specification

Fill Capacity

Gasket Maker
TA-16

WSK-M2G348-A5

Motorcraft® SAE 75W-140 Synthetic Rear Axle Lubricant
XY-75W140-QL (US); CXY-75W140-1L (Canada)

WSL-M2C192-A and GL-5

6.6L (14 pt)⁽¹⁾

Threadlock 262
TA-26

WSK-M2G351-A6

⁽¹⁾	The lubricant capacity will vary depending upon the housing mounting angle. The capacity given is for an angle of 4 degrees. A lubricant level close enough to the bottom of the fill hole to be seen or touched is not sufficient. The lubricant must be level with the fill hole.