LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Front Suspension - Four Wheel Drive (4WD) -- F250-F550 Super Duty) >> Specifications

Section 37 (Front Suspension - Four Wheel Drive (4WD) -- F250-F550 Super Duty): Specifications

WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
MATERIAL SPECIFICATIONS

Item Specification Fill Capacity
High Temperature 4x4 Front Axle and Wheel Bearing Grease
XG-11
WSS-M1C267-A1 -
Threadlock and Sealer
TA-25
WSK-M2G351-A5 -
TORQUE SPECIFICATIONS

Description Nm lb-ft lb-in
Brake caliper anchor plate bolts (F250/F350) 225 166 -
Brake caliper anchor plate bolts (F450/F550) 400 295 -
Hublock screws 6 - 53
Jounce bumper nuts 35 26 -
Lower ball joint nut (1) - - -
Radius arm front and rear nuts (F450/F550) 300 222 -
Radius arm front and rear nuts (F250/F350) 300 222 -
Shock absorber lower bolts 150 111 -
Shock absorber upper nuts 63 46 -
Spring lower nuts 200 148 -
Stabilizer bar bracket nuts 48 35 -
Stabilizer bar link nuts 80 59 -
Tie-rod end nuts 115 85 -
Track bar ball joint nut 250 184 -
Track bar bracket nut 550 406 -
Upper ball joint nut 94 69 -
Wheel extension nuts 176 130 -
Wheel bearing and wheel hub nuts 180 133 -
Wheel speed sensor bolt 18 - 159
Wheel speed sensor harness bolts 15 - 133
(1) Refer to the appropriate procedures in the service information.