LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (Front Suspension - Rear Wheel Drive (RWD) -- F250-F550 Super Duty) >> Removal And Installation >> Wheel Studs - Single Rear Wheel (SRW) >> Removal

Wheel Studs - Single Rear Wheel (SRW): Removal

WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the wheel hub and brake disc assembly. For additional information, refer to Wheel Bearing and Wheel Hub - F250 & F350 .
  2. Using a suitable press, remove and discard the wheel stud.
    Fig 1: Removing Wheel Stud
    G06181434Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals