LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (Front Suspension - Rear Wheel Drive (RWD) -- F250-F550 Super Duty) >> Removal And Installation >> Wheel Studs - Single Rear Wheel (SRW) >> Installation

Wheel Studs - Single Rear Wheel (SRW): Installation

WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the new wheel stud in the wheel hub and brake disc assembly, aligning the serrations in the disc brake rotor flange made by the original wheel stud.
  2. Using a suitable press, install the new wheel stud.
    Fig 1: Installing Wheel Stud
    G06181435Courtesy of FORD MOTOR CO.
  3. Install the wheel hub and brake disc assembly. For additional information, refer to Wheel Bearing and Wheel Hub - F250 & F350 .
scientia non olet · About LEMON Manuals