Track Bar Bushing: Installation
WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
- Special Tool(s): Remover, Bushing 204-608 (204-608). Plate, Bearing/Oil Seal 205-090 (T75L-1165-B). Installer, Drive Pinion Bearing 205-488 (205-488). General Equipment: Hydraulic Press.
- Install the track bar. Refer to Track Bar .
NOTE:
Bushing should be centered in track bar.