LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (Front Suspension - Rear Wheel Drive (RWD) -- F250-F550 Super Duty) >> Removal And Installation >> Radius Arm Bushing - F450 & F550 >> Installation

Radius Arm Bushing - F450 & F550: Installation

WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the new bushing into the axle assembly.
  2. Using the Radius Arm Bushing Remover/Installer, install the radius arm bushing.
    Fig 1: Installing Radius Arm Bushing
    G06776328Courtesy of FORD MOTOR CO.
  3. Install the radius arm. For additional information, refer to Radius Arm - F450 & F550 .
scientia non olet · About LEMON Manuals