LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (Front Suspension - Rear Wheel Drive (RWD) -- F250-F550 Super Duty) >> Removal And Installation >> Ball Joint >> Notes

Ball Joint: Notes

WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOLS CHART

G06136784
Installer/Remover, Ball Joint
204-355
G06124812
Installer/Remover, Ball Joint
204-358
G06094366
Installer/Remover, C-Frame and Screw
205-086 (T74P-4635-C)
Fig 1: Identifying Snap Ring, Grease Fitting, Lower And Upper Ball Joint
G06136787Courtesy of FORD MOTOR CO.
Item Part Number Description
1 97541 Snap ring
2 - Grease fitting (part of 3050)
3 3050 Lower ball joint
4 - Grease plug (part of 3049)
5 3049 Upper ball joint