Front Suspension - Super Duty F250 & F350
WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
The front suspension consists of the following components:
- Coil springs
- LH and RH I-beam axles
- Radius arms
- Shock absorbers
- Stabilizer bar
- Stabilizer bar links
- Wheel spindles
- Wheel studs
The front suspension system for the Super Duty F250 and F350 Rear Wheel Drive (RWD) is a twin I-beam type that uses radius arms to control lateral movement. The wheel spindles are attached to the front axles with upper and lower ball joints and the system uses coil springs and shock absorbers.