Transmission Filler Tube - Gasoline Engines: Installation

WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

Install a new transmission fluid filler tube O-ring seal and lubricate it with clean transmission fluid.

Fig 1: Locating Transmission Fluid Filler Tube O-Ring Seal
Courtesy of FORD MOTOR CO.
Install the transmission fluid filler tube in the transmission and install the lower transmission fluid filler tube bolt.
- Tighten to 25 Nm (18 lb-ft).
  
  Fig 2: Locating Lower Transmission Fluid Filler Tube Bolt
  Courtesy of FORD MOTOR CO.
Install the upper transmission fluid filler tube bolt.
- Tighten to 11 Nm (97 lb-in).
  
  Fig 3: Locating Upper Transmission Fluid Filler Tube Bolt
  Courtesy of FORD MOTOR CO.
Check the transmission fluid. Refer to PRELIMINARY INSPECTION .