Pump Assembly Power Take-Off (PTO)
WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
| Item | Part Number | Description |
|---|---|---|
| 1 | 7A248 | Torque converter hub seal |
| 2 | 7A248 | Pump housing seal |
| 3 | 7L323 | Teflon® seals (3 required) |
| 4 | W500318 | Long pump bolts (7 required) |
| 5 | W500525 | Short pump bolts (6 required) |
| 6 | - | Stator support (part of 7A103) |
| 7 | - | Pump gasket (part of 7A103) |
| 8 | - | Pump body (part of 7A103) |
| 9 | - | Pump housing (part of 7A103) |
| 10 | - | Inner pump gear (part of 7A103) |
| 11 | - | Outer pump gear (part of 7A103) |
| 12 | 7A248 | Pump body seal |
| 13 | 7H375 | PTO drive gear thrust bearing |
| 14 | - | PTO drive gear (part of 7A103) |
| 15 | - | PTO drive gear thrust washer (part of 7A103) |
| 16 | 7A248 | O-ring seal |
| 17 | 7A248 | Teflon® seals (2 required) |