LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Automatic Transmission - 6R140 (TORQSHIFT(R)6)) -- F250-F550 Super Duty) >> Removal & Installation >> Transmission Fluid Pan >> Removal

Transmission Fluid Pan: Removal

WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the vehicle in NEUTRAL, position it on a hoist. Refer to JACKING & LIFTING .
  2. Remove the transmission fluid pan drain plug and allow the transmission fluid to drain.
    Fig 1: Locating Transmission Fluid Pan Drain Plug
    G07482768Courtesy of FORD MOTOR CO.
  3. Install the transmission fluid pan drain plug.
    • Tighten to 18 Nm (159 lb-in).
      Fig 2: Locating Transmission Fluid Pan Drain Plug
      G07482768Courtesy of FORD MOTOR CO.
  4. NOTE: The transmission fluid pan gasket is a reusable gasket. Do not discard the transmission fluid pan gasket.
    Fig 3: Locating Transmission Fluid Pan And Gasket Bolts
    G07482786Courtesy of FORD MOTOR CO.
  5. Remove and 19 bolts and remove the transmission fluid pan and gasket.