LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Automatic Transmission - 6R140 (TORQSHIFT(R)6)) -- F250-F550 Super Duty) >> Removal & Installation >> Transmission Fluid Pan >> Installation

Transmission Fluid Pan: Installation

WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: The transmission fluid pan gasket is a reusable gasket.
  1. Clean the transmission pan and gasket. Inspect the transmission fluid pan gasket for damage and install a new transmission fluid pan gasket if necessary. Make sure the magnet is clean and free of debris.
  2. Install the transmission fluid pan gasket, transmission fluid pan and install the 19 bolts. Tighten the bolts in a crisscross pattern.
    • Tighten to 9 Nm (80 lb-in).
      Fig 1: Locating Transmission Fluid Pan And Gasket Bolts
      G07482786Courtesy of FORD MOTOR CO.
  3. Fill the transmission with clean transmission fluid. Refer to TRANSMISSION FLUID DRAIN AND REFILL .
scientia non olet · About LEMON Manuals