LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Automatic Transmission - 6R140 (TORQSHIFT(R)6)) -- F250-F550 Super Duty) >> Removal & Installation >> Transmission Filler Tube - Diesel Engines >> Removal

Transmission Filler Tube - Diesel Engines: Removal

WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the upper engine oil level indicator tube. For additional information, refer to ENGINE - 6.7L DIESEL .
  2. Remove the exhaust downpipe. For additional information, refer to EXHAUST SYSTEM .
  3. Remove the transmission fluid level indicator.
    Fig 1: Locating Transmission Fluid Level Indicator
    G07482895Courtesy of FORD MOTOR CO.
  4. Remove the lower transmission fluid filler tube bolt, remove the transmission fluid filler tube and discard the O-ring seal.
    Fig 2: Locating Lower Transmission Fluid Filler Tube Bolt
    G07482896Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals