LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Automatic Transmission - 6R140 (TORQSHIFT(R)6)) -- F250-F550 Super Duty) >> Disassembly & Assembly Of Subassemblies >> Center Support >> Assembly

Center Support: Assembly

WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using the Center Support Bearing Installer, press a new bearing on the center support assembly.
    Fig 1: Pressing Bearing On Center Support Assembly
    G07972649Courtesy of FORD MOTOR CO.
  2. Inspect the center support alignment lugs to be sure they are installed securely in the center support. If the center support alignment lugs are loose, use grease to hold them in place.
    Fig 2: Locating Center Support Alignment Lugs
    G07972650Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals