Gearshift Cable Adjustment - Vehicles With: 6-Speed Manual Transmission - MMT6

Set the manual shift lever to the neutral (N) position. Fully apply the parking brake lever.

Fig 1: Identifying Neutral Position Of Manual Shift Lever (6 Speed Manual Transmission)
Courtesy of FORD MOTOR CO.
Fig 2: Removing Gearshift Cable
Courtesy of FORD MOTOR CO.

NOTE: By placing the shift lever into the 4th gear position, it locks the small lever into the NEUTRAL position.

Fig 3: Identifying Shift Lever Into Fourth Gear Position

Courtesy of FORD MOTOR CO.