LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Focus S, Standard Trans, Gas >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Automatic Dual Clutch Transaxle (DCT) POWERSHIFT (DPS6/6DCT250) - External Controls) >> Diagnosis and Testing >> External Controls >> Pinpoint Tests >> TCS/Grade Assist >> Normal Operation and Fault Conditions

Normal Operation and Fault Conditions

WARNING: This page is about a different variant/trim than selected.

The TCS/Grade Assist is a momentary contact switch located on the selector lever. Pressing the TCS will engage or disengage the O/D  function of the transmission. When the O/D  is disengaged, the O/D  icon will illuminate OFF on the IPC. Each time the ignition switch is cycled, the transmission will automatically provide O/D  operation regardless of TCS position the last time the engine was running.

DTC FAULT TRIGGER CONDITIONS

DTC Description Fault Trigger Conditions
P1780 TCS / O/D  Circuit Out Of Self-Test Range The TCS / O/D  switch or circuit failed during the self-test.
scientia non olet · About LEMON Manuals